IOT Smart Energy Meter with Theft Alert using Arduino, GSM, ESP 8266 | Engineering Project
#arduinoproject #finalyearproject #iot
IOT Projects #engineeringproject #capstoneProject #majorProject
for EEE ECE Mechanical Science Exhibition project
IoT smart energy meter Arduino, energy meter theft detection Arduino, smart energy meter theft Arduino, Arduino energy meter theft monitoring, IoT energy theft prevention Arduino, smart meter security Arduino IoT,
hindi explaination:
• ⚡IOT based Smart Energy Meter with Theft A...
**Description**
This project monitors electric meter readings to detect theft and ensure accurate billing. It uses two meters, each controlling bulbs and Light Dependent Resistors (LDRs) to track power usage. Readings are displayed on an LCD and trigger an alert with a buzzer and GSM notifications to the consumer. Data is uploaded in real-time to ThingSpeak via an ESP8266 Wi-Fi module for visualization. Continuous monitoring helps detect anomalies and prevent theft.
**Objectives**
To confirm normal usage patterns and prevent incorrect billing due to tampering.
To continuously analyze meter readings to detect Theft.
To continuously track and display the power consumption readings from two electric meters
**Components required**
Arduino (Microcontroller)
Energy meter (X2)
ESP8266-01 (Wi-Fi)
Buzzer
LCD 16X2
Connecting wires
Block diagram
**Methodology**
This project is designed to monitor electric meter readings and detect potential theft through a series of integrated components. Initially, two electric meters are set up with the first meter input is connected directly to the AC supply and the second meter receiving its input from the first. Each meter has bulb into their output and has Light Dependent Resistors (LDRs) mounted on blinking light to detect power usage. When a bulb is turned on, the corresponding meter's reading increases, and these readings are displayed on an LCD screen. The system continuously compares the readings of both meters; if a mismatch is detected, indicating possible theft, an alert is triggered. This alert includes sounding a buzzer and sending continuous notifications via a GSM module to the consumer's phone. In normal usage, with both bulbs turned on, the readings from both meters should increase in sync, reflecting their series connection and confirming accurate usage. Additionally, the ESP8266 Wi-Fi module uploads real-time data to the Thing Speak server, allowing for graphical visualization of the meter readings. More features related to IOT can be added.
To Buy/ Make this project with training
contact us:
👨🏼🏭𝗩𝗶𝗽𝗶𝗻 𝗞𝘂𝗺𝗮𝗿 𝗦𝗵𝗮𝗿𝗺𝗮
Ph.D., M.Tech, B.Tech in ECE
🎓Lecturer 🚀#Researcher #Drone #Robotics
WhatsApp : + 91-9810326343
https://xilirprojects.com
1. Synopsis/ Documents
2. Block diagram and circuit diagram with explanation.
3. Bill of material.
4. Components Specification list
5. Working principle of the project.
6. Datasheet of all components.
7. Program/code of Arduino with training.
8. Complete Working principle description.
9. Complete interfacing description.
10. you can get the project by courier.
11. viva preparation
ask us if other things needed.
JOIN US GUYS THANKS
========
👥Facebook: / xilirprojects
🐤Twitter: / xilirprojects
✅🔥Follow us on 📸Instagram🔥✅
/ xilirprojects
👨🏻🎓Linkedin: https://bit.ly/39occm2
========
𝗔𝗯𝗼𝘂𝘁 𝗨𝘀 :
𝗫𝗶𝗟𝗶𝗥 𝗧𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝗶𝗲𝘀™ is India’s 🔖Top rated & Leading R&D Company. It's an ISO 9001:2008 Certified Company & Govt Approved under MCA & it was Established in 2013.