Lineless 3D Printing - How to 3D Print Your Repo Without Print Lines
🐱 This Repo is 3D printed…
3D prints, no print lines.
-
🧩 Model: Repo by @qcosa3d (Cults3D: 2848292)
🖨️ Thanks @Flashforge and @Ranko for the printers.
-
🎯 The problem:
My nephews wanted some 3D printed Repos,
but the lines on the heads made them look ugly.
And that… ruined the whole project.
-
🔍 The research:
This happens because in curved areas,
the layers are more noticeable when printed on top of each other.
-
🧪 I tried lowering the layer height to make the finish smoother…
but it wasn't enough.
-
💡 The solution:
I discovered that some 3D filaments can be smoothed with solvents.
This liquid softens the surface by melting the outer layers.
-
✨ The result?
After a simple bath...
we obtained these wonders.
-
⚠️ Be careful with the solvent** you use.
⚠️ Do NOT do this if you are not a professional.
⚠️ Do NOT use solvent** that is not over-the-counter.
-
#3dprinting #3D #3dprinting #3dargentina #layers #fusion360 #madewithfusion #3dprinter #3ddesign #PLA #ABS #cura #orcachlicer #repo #tinkercad #3dhumbe