6. CISCO vWLC Configure FlexConnect(Local mode is not supported in vWLC)

Опубликовано: 22 Март 2026
на канале: Donghowa Network
1,121
9

vWLC supports only Flexconnect which has Central and Local Switching
https://community.cisco.com/t5/wirele...

Features Not Supported on vWLC
Data DTLS
Cisco 600 Series OfficeExtend Access Points
Wireless rate limiting (bandwidth contract)
Internal DHCP server
Access points in local mode
Mobility/guest anchor
Multicast-unicast mode
IPv6
PMIPv6
WGB
VideoStream
Controller High Availability AP-SSO
Outdoor mesh access points (Outdoor AP with FlexConnect mode will work)

1. AP mode from Local to Flexconnect
2. Configure initial SSID
status enabled
PSK cisco1234
3. so far, It's acting like local mode
4. after you check "VLAN support"in Flexconnect tab, the SSID will be act as local switching rather than central switching.
4.1 the SSID should be checked with "Flexconnect local switching" in Advanced tab
4.2 if "FlexConnect local switching" is not checked, the SSID will be central switching