ZWC-100A Stepper Motor Controller
1, can achieve jog positive and negative
The forward rotation switch is closed to control the motor to rotate forward; the reverse rotation switch is closed to control the motor to reverse. The forward and reverse switches can be PLC output ports, travel switches, inductive switches, push button switches, etc.
2, can be internal potentiometer or external potentiometer speed
If the externally connected speed potentiometer is not detected when the controller is powered up, the internal potentiometer will automatically adjust the speed. The external speed potentiometer is recommended to use a 10k potentiometer (it is also possible to use a potentiometer of less than 10k, but the speed range is narrowed). External speed control principle: different resistance values between speed control port and COM port, the controller outputs different frequency pulses. The larger the resistance value is, the lower the frequency is. When the resistance value is greater than 10k, the output pulse is stopped. Therefore, the potentiometer can be completely terminated. Pulse output.
3, with limited function (forward limit and reverse limit)
4, compatible with 12V or 24V power supply
The controller can be powered by 12V or 24V DC.
5, the highest pulse frequency 20kHZ
6, the direction and pulse port is 5V level, can be directly connected to the drive, no need to series resistors on the wire
7. Adjust the acceleration slope and deceleration slope separately
https://www.lollette.com/ZWC-100A