How to Set Static Fan Control on
Disclaimer: Improper use of IPMI command can cause damage to your equipment. Use at your own risk.
How to Enable IPMI: • How to Enable IPMI in DELL System Setting
Dell Fan Control Commands:
Senors read out: ipmitool -I lanplus -H [interface] -U [username] -P [password] sdr list full
Enable manual/static fan control: ipmitool -I lanplus -H [interface] -U [username] -P [password] raw 0x30 0x30 0x01 0x00
Disable manual/static fan control: ipmitool -I lanplus -H [interface] -U [username] -P [password] raw 0x30 0x30 0x01 0x01
Set fan speed to 20%:
Enable manual/static fan control: ipmitool -I lanplus -H [interface] -U [username] -P [password] raw 0x30 0x30 0x02 0xff 0x14
*Note:
Replace [interface] with your iDRAC IP address
Replace [username] with iDRAC admin user
Replace [password] with iDRAC admin password
Decimal to Hex Converter: https://codebeautify.org/decimal-hex-....
Credit: [email protected]
Original Article: / dell_fan_noise_control_silence_your_poweredge
➡️ Should you find this tutorial helpful, we kindly request that you consider supporting our channel by subscribing to our YouTube channel or using the affiliated links and URL shortener links provided below. Through your purchase using any of the given links, we will receive a small commission, which we will use to expand our channel and enhance our services. We appreciate your support, and we remain committed to providing you with quality content.
⚠️ FTC Disclaimerhttps://sysadmin102.com/disclaimer-ft....
♡ Ways to support: https://sysadmin102.com/ways-to-suppo...
🌐 Website: https://sysadmin102.com/
✉️ Business Inquiry: [email protected]
© SYSADMIN102™ LLC
✉️ Business Inquiry: [email protected]
© SYSADMIN102™ LLC