Getting Started With Raspberry Pi and WD Labs PiDrive
This video is sponsored by WD Labs. You can learn more about them and their line of Raspberry Pi kits and accessories at http://wdlabs.wd.com/.
=Hardware Used in This Video=
WD PiDrive Compute Centre
https://www.wdc.com/products/wdlabs/w...
Alternately, if you already have a Raspberry Pi setup and would simply like to add a PiDrive to it, you can pick up the following, which includes a hard drive, the unique data/power cable, and a microSD card preinstalled with a custom version of NOOBS:
WD PiDrive Foundation Edition
https://www.wdc.com/products/wdlabs/w...
=Logging In to Raspberry Pi=
Username: pi
Password: raspberry
Note: when a password is typed you will not see any characters being
entered. This is normal.
=Commands Used in this Demo=
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
(see this guide for more info on configuring Wi-Fi using command line: https://www.raspberrypi.org/documenta...)
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install kodi
sudo apt-get install --no-install-recommends xserver-xorg
sudo apt-get install raspberrypi-ui-mods
reboot
To learn more about Raspberry Pi, I highly recommend the resources provided by the Raspberry Pi Foundation: https://www.raspberrypi.org/resources/
To learn more about the PiDrive and configuring Project Spaces, I recommend this getting started guide by WD Labs: http://wdlabs.wd.com/global/docs/wd-p...
Original music composed by Chachi Jones and used with permission.
Subscribe to Maker Project Lab on YouTube
https://www.youtube.com/c/makerprojec...