Civil 3D: Add Station Equation
Station Equation. Solving the problem with: create points- IMPORT from file.
Сorrect display Sample Line Labels.
[Sample Line Station Value(Um|FS|P2|RN|AP|Sn|TP|B3|EN|W0|OF)]
Civil 3D: Adding "Station Equations" to the Alignment. And the solution with the display of the correct station line in the "Sample Line". Note that when importing points from a file and distributing them along the Alignment, there is a problem-Civil does not see the Station Equations . The import takes place as if on a normal Alignment. The simplest solution: It is manual (in excel) to add a station shift according to the picket offset in "Sample Line" (change in the text component editor and "Sample Line Name" to "Sample Line Station Value"
ps
Station Equation appear directly in the design and construction process. Station Equation when the surveys are completed (plans and profiles have been built along the route of a linear object), and due to previously unforeseen circumstances, it is necessary to re-route the linear structure in certain places along the route, then, in order not to interrupt the picketing from the place of re-routing, a Station Equation is made (i.e. more or less 100 m).
Or: when two tunnels with different radii are located next to each other and they must approach the railway station with the same stations values.
It may be interesting to see my work.
review of the apps:
Auto level surveying calculations + Сollimation https://play.google.com/store/apps/de...
Spreadsheet interpolation https://play.google.com/store/apps/de...
Earthwork. Volume Measurement, altitude control over the base surface, adding Contour Lines, adding Direction Arrow with Slope Labels(Two-point) https://play.google.com/store/apps/de...