HOW TO SEW A TRANSFORMER ENVELOPE FOR A NEWBORN / DIY DISCHARGE ENVELOPE / MASTER CLASS

Опубликовано: 29 Май 2026
на канале: sewingBlogger
557,312
9.8k

How to sew a convertible sleeping bag for a newborn yourself 👐
A convertible sleeping bag is a blanket that folds into a sleeping bag with a zipper. It can be used for walks outside, for discharge, folded into a pillow, or used as a footmuff!

To sew the sleeping bag, I needed:
✔ 2 meters of fabric
✔ 1 meter of insulation
✔ 1 meter of bias binding
✔ 40 cm elastic
✔ 55 cm zipper
✔ 20 cm zipper

First, I cut three pieces of fabric and insulation, each measuring 83 x 83 cm, since the finished sleeping bag, when unfolded like a blanket, will be 80 x 80 cm. The folded dimensions are 40 x 80 cm. I've already cut out three pieces and will now quilt one part of the insulation to the fabric using a diamond pattern. To do this, I need to draw the diamond patterns on the fabric or iron the lines. I iron the lines, then pin the fabric with the diamond patterns and the insulation along the edge, pin along the edge, and along the lines along which I will sew the insulation to the fabric. I then sew along all the stripes and along the edge with a sewing machine, leaving a 0.7 cm margin from the edge. One part of the envelope is ready. Now I sew a 20 cm zipper to the second part, sew it on the top of the hood, and sew a second detachable zipper at a distance of 55 cm along the sides of the fabric, leaving a 1.5 cm margin from the bottom edge. Now I cut out a pocket measuring 30x42 cm, two pieces of fabric (as in the picture), merge these pieces at the top and make a drawstring for elastic at the top of the pocket, then insert the elastic into the drawstring; you can use a wide or narrow elastic. I sew the elastic along the edges. Then I sew bias tape along the edges of the pocket, lengthwise. Now I sew the pocket to the fabric, finding the middle of the fabric and pocket and aligning them. The pocket needs to be sewn at the bottom in the middle. I have the two parts of the envelope ready, now I sew the two parts of the envelope together, leaving a 10-15 cm opening, unsewn, and turn the envelope right side out. I trim off the excess insulation and corners. I sew the opening on the machine and topstitch the blanket along the edge to the width of the presser foot. That's it, the envelope is ready ❤

If you liked the video, give it a 👍 and subscribe to the channel ❤
Don't forget to click the bell!

Follow us on social media. Social media ⤵️
Instagram
  / oksana_kondratska  
Facebook
  / oksana.kondratskay  
VK
https://vk.com/id429952614

--------------------------------
Lightness by Nomyn   / nomyn  
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/2CDOZQC
Music promoted by Audio Library    • Lightness – Nomyn (No Copyright Music)  

--------------------------------

#babynest#converttransformer#withyourhands