Configure VRRP on mikrotik load sharing with dhcp server
1-Set Router to Internet
2-Add NAT
3-Add Route
4-Add DNS
5-Create Vlan Interface
6-Set ip to vlan
Router R1
----------
Add VRRP interface for vlan10 and vlan20
Vlan10 = VRID:10 (must be same in master and backup router)
Priority: 200 (must be big than backup)
Vlan20 = VRID:20 (must be same in master and backup router)
Priority: 100 (must be less than master)
Virtual Gateway (Must be the same master and backup router)
Vlan10: 10.10.10.254/24
Vlan20: 20.20.20.254/24
Setup DHCP Server for vlan10 and vlan20
interface select interface vrrp on vlan
vlan10 start: 10.10.10.100-10.10.10.253
vlan20 start: 20.20.20.100-20.20.20.253
Manage Switch
----------
Configure Manage Switch cisco
Port: g0/0, g0/1 (Configure as trunk port)
Port: g0/2 (Access vlan10)
Port: g0/3 (Access vlan20)
Router R2
----------
Add VRRP interface for vlan10 and vlan20
Vlan10 = VRID:10 (must be same in master and backup router)
Priority: 100 (must be less than master)
Vlan20 = VRID:20 (must be same in master and backup router)
Priority: 200 (must be big than backup)
Virtual Gateway (Must be the same master and backup router)
Vlan10: 10.10.10.254/24
Vlan20: 20.20.20.254/24