HCW M635 Tutorial Changing setting parameter, paano magpalit ng setting
0:01 - introduction
0:34 - module introduction
1:38 - shut off and on voltage
2:23 - how to change cut off setting
3:53 - how to change discharge mode
5:00 - end of tutorial
5:25 - outro
This module use to protect battery from over discharging and over charging, this can also use to power lights, motor etc depending on the circuit of your project, it can handle battery set up from 12v to 36volts and load amphere at 10 maxximum
Changing parameter of this module is not that complicated just watch my video or follow instruction below
How to change parameter?
First check the setting of low voltage, just press left button once then it will show the setting of low voltage, leave it for a second to check voltage difference cut off, Now press left button twice and then once at right button it will show voltage difference
Now by changing its low voltage cut off just press left button once it must show low voltage setting then press again twice, if you see the red dot between number is blinking thats the time to change setting for low voltage cut off, left button to increase voltage right button to lower the voltage, after changing the setting leave it for a second to save setting
here are the sample of recommended setting
12 volts set up - 11.8 volts
24 volts set up - 23.2 volts
36 volts set up - 34.8 volts
Changing Difference voltage for discharge
remember that voltage for discharge mode is not the actual voltage sample if low voltage for 12 volts is 11.8 volts the setting you input for discharge mode is only 2.6 volts to make discharge voltage at 14.4 volts
First press the left button twice then once to the right button wait for 2 sec then press again the right button twice,
Here are the suggested discharge voltage parameter for battery set up
12 volts set up - 14.4 volts
24volts set up - 28.8 volts
36 volts set up - 43.2 volts
In this tutorial video titled "HCW M635 Tutorial: Changing Setting Parameters // Paano Magpalit ng Setting," we will guide you through the process of changing setting parameters on the HCW M635 device. Whether you're a beginner or an experienced user, understanding how to adjust and modify the settings on your device is crucial for optimizing its performance and meeting your specific needs.
Throughout the video, we will provide step-by-step instructions, accompanied by clear visuals, to ensure a comprehensive and easy-to-follow tutorial. We will cover the essential aspects of changing setting parameters, including accessing the settings menu, navigating through different options, and making adjustments as desired.
By the end of this tutorial, you will have a confident grasp of how to modify the setting parameters on the HCW M635, enabling you to customize the device to your preferences and requirements. Whether you're looking to enhance functionality, optimize performance, or tailor the settings to a specific task, this tutorial will equip you with the necessary knowledge to achieve your goals.
Join us in this informative tutorial and empower yourself with the skills to master the HCW M635's setting parameters. Don't miss out on this opportunity to expand your understanding and make the most of your device's capabilities.
Here are three potential tags for your HCW M635 tutorial video:
#hcwm635tutorial
#changingsettingparameter
#paanomagpalitngsetting