NX Tutorial | Sketching with reference curves, Create arcs in sketch, Position coordinate systems
B1P-19 | Siemens NX 2007 Tutorial Modeling | Sometimes, auxiliary geometries are needed to create the required dimensioning or relation.
NX calls such curves reference curves. After clicking on a normal sketch curve, it can be converted into a reference curve and vice versa.
Dimensions can also be converted into reference dimensions in the same way and are then only used for information, not for controlling the sketch.
In addition, the course shows the circular arc command in the sketch, which is used to create the grooves in the clamping disk.
The position of the thread is positioned associatively, via measurements and references, centrally on the shell surface with the help of a coordinate system.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | Modeling for beginner
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on YouTube. (and about your subscription ;-) / @learnnx
▬ Visit https://learnnx.com ▬▬
On our learning platform, you will find all tutorials clearly arranged in courses.
(Modeling, Drafting, Assemblies, Surface Modeling, Part Families etc.)
Here you can also search for commands or topics 🔎.
All tutorial videos have a short description, along with practice material as 𝐝𝐨𝐰𝐧𝐥𝐨𝐚𝐝.
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
Be a member of learnNX, see all videos, 7,99 € per month
Benefits of membership • Siemens NX Tutorial | Become a LearnNX member
Become a member / @learnnx
How to change the language for audio tracks
• NX tutorial multilingual | learnNX
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Content
00:00:12 Foreword
00:00:51 Create base body
00:01:49 Create arcs
00:03:59 Create reference curves
00:04:49 Dimension sketch
00:06:53 Pattern groove
00:07:40 Positioning between two points
00:09:19 Positioning via coordinate system
00:10:14 Pass measurement
00:10:59 Pass parameter
00:11:48 Position hole
00:13:33 Conclusion
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on https://learnnx.com
#learnNX #SiemensNXfreeCourse