IP PHONE CONFIGURATIONS with two networks and VLAN routing, encapsulation dot1q cisco packet
STEPS
Network 1
1. build physical topology
2. assign ip addresses to interface
3. configure DHCP server
4. assign switch ports to voice Vlan
5. left PC to Vlan 1
6. configure telephony service
7. assign phone numbers
8. testing
Network 2
1. build physical topology
2. create vlans 10 and 20
3. assign phones to access Vlan 10
4. assign Vlan 10 to access voice Vlan
5. assign PC to access vlan 20
6. configure Trunk interface
7. configure inter-Vlan on router
8. configure DHCP server to each Vlan
routing
1. configure static routing with next hop
2. route phone number to match patterns
3. testing
any question ?
+255675839840