EMBROSOFT – How to fix an iron on patch (small patch)
➤ VISIT OUR SITE:
http://embrosoft.com
How to fix an Iron On Patch to your garment.
1. Spread the garment on the ironing board, and put the patch in place.
2. Cover the patch with a cloth to protect the garment and the patch.
Set the iron to the "synthetics" setting, to prevent damage.
Use slowly, about 10-15 seconds in one place, to be sure the glue is well stuck to the fabric.
3. Turn the product inside out.
4. Cover the reverse patch area of the garment with a cloth to protect it.
Place the iron over the patch area for about 10-15 seconds, keep the iron in one place.
Pay attention to the edges of the patch. They must be well glued all around the edge. If you see the edge is not glued down properly, then reheat the edges again.
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
➤ OUR STORES:
http://stores.ebay.com/embrosoft
https://www.etsy.com/ca/shop/embrosoft
➤ FOLLOW US:
/ embrosoft
/ embrosoft_canada
/ embro_soft
/ embrosoftcanada
➤ VIDEO BY:
http://irenvideo.com
➤ THANKS TO
http://www.patchdepot.co.uk
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・