Black and white TV "Rembrandt" GDR 1953

Опубликовано: 04 Май 2026
на канале: Virtual Museum www.retrotexnika.ru
3,699
49

Page TV "Rembrandt" in our website: http://retrotexnika.ru/zavod-saksonve...

TV receiver black-and-white image of "Rembrandt" from may 1953 produced in the GDR, the mountains. Radeberg factory Sachsenwerk. TV "Rembrandt" to 1957 inclusive were exported to the USSR. It was adapted for the USSR version (FE-852B), there were no secondary adjustment knob definition. It is designed to receive TV programs in the first 3 channels, UHF radio range 66...of 67.5 MHz and listen to the recording with external EPU. The TV is assembled in a polished wooden box the size of 675х435х430 mm, its weight is 35 kg. The TV power is supplied from the AC network with voltage of 110, 127 or 220 V. When television consumes a power of 210 watts, when receiving a radio station 105 watts. In TV 22 radio tubes. The radio channels collected by the superhet circuit, with the separate amplification of if image and sound. Kinescope round HF 2963, with a diameter of 30 inches and the image size 180h240 mm, protected with unbreakable glass. The kinescope in the parameters was equal to CRT 31ЛК2Б, but was more durable and the picture on it was sharp and contrast. To the right of the screen, for decorative cloth is elliptical loudspeaker, and the screen below is four double pen: to turn on, switch modes: "TV", "world Cup", "STAR", the settings on the TV or radio station, adjusting brightness, loudness and timbre. The rear chassis of the TV, there are additional handles to adjust the frame and line scans. The TV has a sensitivity of about 500 mV. Rated output power audio channel 2 watts. The effective range of reproduced sound frequencies 120...4000 Hz. The apparatus is equipped with AGC ensures a constant contrast, with a significant changing of the signal on the antenna input. The alignment of the image on the screen by changing the position of the focusing coils, located at the mouth of the receiving tube by a special lever. The nodes of TV are assembled on a chassis made of metal, fastened to the case with two bolts. The electrical circuit has available the hinged mounting, located in the basement of the chassis on planks of the PCB. In the USSR only imported about 20 thousand TV sets "Rembrandt".