How to connect your IP camera to your PC for IP configuration?
*Guide: How to Connect an IP Camera to a PC for IP Configuration Using Camera Device Manager (NETCCTV UK IPC)*
This step-by-step guide will help you connect your *IP camera* to a *PC* and configure its IP settings using *Camera Device Manager* .
---
*Requirements*
✅ *IP Camera* (NETCCTV UK IPC or compatible)
✅ *PC/Laptop* (Windows recommended)
✅ *Ethernet Cable* (for direct connection) or *Router/Network Switch*
✅ *Power Supply* for the IP camera
✅ *Camera Device Manager Software* (or manufacturer's configuration tool)
---
*Step 1: Physical Connection*
*Option A: Direct Connection (Camera to PC via Ethernet)*
1. *Power on* the IP camera using its adapter.
2. *Connect* the camera to your PC using an **Ethernet cable**.
3. *Disable Wi-Fi* on your PC to avoid conflicts.
*Option B: Connection via Router/Network Switch*
1. *Power on* the IP camera.
2. *Connect* the camera to your *router/switch* via Ethernet.
3. Ensure your *PC is on the same network* (Wi-Fi or Ethernet).
---
*Step 2: Find the Camera’s IP Address*
*Using Camera Device Manager (Recommended)*
1. *Download & Install* [Camera Device Manager](https://www.netcctv.com/) (or the manufacturer’s tool).
2. *Open the software* and scan for cameras.
3. The camera should appear in the list with its *default IP* (e.g., `192.168.1.108`).
*Alternative: Using IP Scanner (Advanced Method)*
Use *Advanced IP Scanner* or *Angry IP Scanner* to find the camera’s IP.
---
*Step 3: Configure the Camera’s IP Address*
1. *Open Camera Device Manager* and select your camera.
2. Click *"Modify IP"* or **"Network Settings"**.
3. *Assign a new IP* (must match your network range, e.g., `192.168.1.100`).
Subnet Mask: `255.255.255.0`
Gateway: Your router’s IP (e.g., `192.168.1.1`)
4. *Save settings* and wait for the camera to reboot.
---
*Step 4: Access the Camera via Web Browser*
1. Open a *web browser* (Chrome, Firefox).
2. Enter the *new camera IP* (e.g., `http://192.168.1.100`).
3. *Log in* using default credentials (check the camera manual).
4. *Configure* additional settings (password, recording, etc.).
*Troubleshooting*
❌ *Camera not detected?*
Check power & Ethernet connection.
Disable firewall/antivirus temporarily.
❌ *Can’t access the web interface?*
Ensure the IP is correct and in the same subnet.
Try a different browser (use *Internet Explorer* for older cameras).