Siemens NX Tutorial | Fillet in sketch, reposition sketches, copy with copy paste
B1P-11 | Siemens NX 2007 Tutorial Modeling | What is more constant than change? And such constant change makes the design of components a very dynamic process. Changing requirements always demand adjustments to the existing design. This usually includes the repositioning of sketches.
If these sketches are appropriately prepared for such a change, the adjustment is completed with just a few clicks. Work steps based on this are also moved to the target position. Prepared in this way, simple copying via copy paste is also quickly done.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | Modeling for be...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on YouTube. (and about your subscription ;-) / @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: https://learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Content
00:00:11 Foreword
00:00:44 Create sketch
00:01:21 Briefly explained: the command Fillet
00:03:42 Create fillet
00:04:26 Create hollow profile
00:04:47 Reattach without external references
00:06:16 Reattach with external references
00:10:41 Create dependent copy
00:12:39 Connect copy with original
00:14:25 Conclusion
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on https://learnnx.com
#learnNX #SiemensNXfreeCourse