Autocad Civil 3D: Work with point labels style
1 / Using the LINEWORKSHRINKWRAP command, we turn two polylines into a closed shape.
Select the desired points to edit, then press CTRL to select the point label to move. Switch to the PAPER. Activate the MODEL in the PAPER (I already had the model active).
2 / Rotate the polyline to a position convenient for viewing (printing), to do this, run the DVIEW command (only in the sheet in the active Model), select the object relative to which the rotation will be performed, run the TWist command and set the rotation angle (in my case - 45°. The twist angle is measured counterclockwise, with 0 degrees to the right.), but you can manually click to stop the rotation in the desired position.
3/ make Sure that the labels get in the way and will fit on a polyline. Therefore, we go to the "Point Group Properties" and start "Edit current selection" the "label style" by switching the "Orientation Reference" from the OBJECT to the VIEW. And the point labels will automatically orient themselves according to the view, and become easy to view
4 / Next, To "Reset labels" in a label set. Select one of the labels in the group. Right-click the label, and click Reset All Group Labels.
Bonus shown:
that the placemark's callout can be deformed and
and also showed that in the selected points it is possible to MOVE the command to change the Elevation of points by a given value (99.99-0.49 = 99.50)command to change the marks of points by a given value (99.99-0.49 = 99.50)
https://knowledge.autodesk.com/ru/sup...
It may be interesting to see my work.
review of the apps:
Auto level surveying calculations + Сollimation https://play.google.com/store/apps/de...
Spreadsheet interpolation https://play.google.com/store/apps/de...
Earthwork. Volume Measurement https://play.google.com/store/apps/de...