Click PLC Media Access Control Address (MAC Address)
The Click PLC Media Access Control Address or MAC address is a unique number that can identify the device on your network. It is often used for assigning IP addresses by the DHCP (Router) on the web.
Using the Click PLC programming software, there are three ways to view your MAC addresses in the Click PLC.
1. Connect to the Click PLC - The discoverable ports will be displayed.
2. The online project information screen will contain the MAC addresses.
3. System Data Registers will display the MAC address through the Data View monitoring.
Port 1 MAC - SD188 to SD193
WLAN MAC - SD194 to SD199
Programming and examples of the Click and Click PLUS PLC series can be found at this URL:
https://accautomation.ca/series/click...
We are using the Click and Click PLUS PLCs for several reasons. Here are just a few.
Investment is low for the hardware, and the software is free
Standalone PLC with built-in I/O
Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus RTU, Modbus TCP, etc.
Ability to expand the system with various modules, including RTD and Thermocouple inputs.
General information on the Click series of controllers:
www.clickplcs.com/config
System configuration tools will also calculate the power budget, I/O count, and price.
Click PLUS PLC Configuration:
https://www.automationdirect.com/clic...
Click PLC Configuration:
https://www.automationdirect.com/clic...
#shorts
ACC Automation
https://accautomation.ca/