Warbonnet Superfly Hardware & Setup
In this video I’ll show you how I implement Dutch Ware Gear to make my Superfly setup quick, easy and versatile.
Video Breakdown:
0:00 - Introduction
0:57 - Takes/guy lines, Side pullout bundles
3:13 - Setting up the ridgeline
4:23 - Dutch Wasp
5:42 - Prusik loops on ridgeline
7:36 - Securing tarp to the open prusick loop
10:40 - Locking doors inside
11:28 - Corner guy outs
15:00 - Side pullouts
20:46 - Locking the doors
21:34 - Using the additional prusik loops
24:49 - Conclusion
Below is a list of ALL the gear outlined in this video. These are NOT affiliate links:
Warbonnet Superfly Tarp: https://www.warbonnetoutdoors.com/pro...
Tarp Sleeves: https://dutchwaregear.com/product/tar...
Zing-It (used for Ridgeline, guy lines, side pullout adjustments): https://dutchwaregear.com/product/min...
Ridgeline Wasp: https://dutchwaregear.com/product/was...
Titanium Hooks (for ridgeline start and side pullouts, three used): https://dutchwaregear.com/product/ti-...
Fleaz (used to secure side pullouts to guy lines, can also be used in place of Ringworms - two used): https://dutchwaregear.com/product/fle...
Ringworms (used to secure corner guys, can also be used in place of Fleaz - four used): https://dutchwaregear.com/product/rin...
Tarp Door Clips (NOTE: the plastic clips I used in my setup are no longer available from Dutch. They've updated the line to titanium with double hook ends): https://dutchwaregear.com/product/tar...
Splicing Needle(s) (used to make Amsteel loops, I used both sizes): https://dutcwaregear.com/product/spli...
Zing-It (the gray Amsteel used for ridgeline and side pullout prusik knots): https://dutchwaregear.com/product/zin...