Multi channel output RS485 RS232 USB interface standard laboratory power supply
3、 Three independent output series power supply
Click on the power switch to enter the initial state of the power supply, and each channel enters the waiting state for output
Characteristic
1. Three independent adjustable programming outputs
2- External series¶llel output
3- Standard RS485/USB/RS232/SENSE interface: Standard RS485/USB/RS232/SENSE interface
4- Each channel has 3 sets of fast outputs
Voltage and current settings
Press the "U cv" voltage setting button and adjust the output voltage value through the voltage adjustment button by pressing the "U cv" voltage setting button
Press the "I cc" voltage setting button and adjust the output current value through the voltage adjustment button by pressing the "I cc" voltage setting button
Press the 'Output' on/off key to control the output status of the three channels as open by pressing the 'Output' on/off key
Overvoltage protection settings
1. Long press the "U cv" button to enter the overvoltage protection setting interface, and the voltage editing position will flash and display
2- Change the threshold value through the voltage adjustment key, and press the current adjustment key to turn on overvoltage protection by pressing the current adjustment key
Press the "Output" on/off key, as the output voltage value is greater than the overvoltage protection voltage value, the overvoltage protection function of CH1 is triggered, and CH1 automatically disconnects the output
Overcurrent protection settings
1. Connect to the load, long press the "I cc" button to enter the overcurrent protection setting interface, and the current editing position will flash
2- Change the threshold value through the current adjustment key, and press the voltage adjustment key to turn on overcurrent protection by pressing the voltage adjustment key
Press the "Output" on/off key, as the output current value is greater than the overcurrent protection current value, the overcurrent protection function of CH1 is triggered, and CH1 automatically disconnects the output