TPLINK CPE210 / 220/ 510 / 610 Access Point and Client Complete Setup
#AccessPoint
#TPLink
If you find this video helpful,
Donation accepted at any amount.
GCASH 09167555337
You may want to have internet access for your nearby farm house to monitor CCTV, or control SMART SWITCH for generator or equipment, refill water for pets, or enjoy browsing while you're with your work away from home where fiber line is not available. Access Point answer this. So here's the simple and complete set-up and configuration. Remember to attach Router at the CLIENT CPE for WIFI Access..
Needed equipment:
2PCS pair
TPLINK CPE210 or CPE510
2PCS CAT6 OUTDOOR LAN CABLE needed to connect adapter to CPE
2PCS INDOOR CAT6 LAN CABLE needed to connect router to adapter.
TAKE NOTE: Router must be attached at the CLIENT CPE Power Adapter LAN PORT to enjoy browsing the internet
CPE210 Range tested: Best Performance if less that 1000m distance from the Access Point
If distance is more than 1km, it is better to use CPE510
You cannot use CPE210 and match with CPE510
You must use same frequency CPE, means if you use CPE210 as Access Point, then your Client must be CPE210