How to Fix Error C7101 on Kyocera TASKalfa Printer
If you're experiencing problems with your Kyocera TASKalfa printer, be sure to watch this video for tips on how to fix the error C7101. We'll provide you with step-by-step instructions on how to fix the problem and get your printer working again!
Description: T/C sensor BK error
Causes: For the specified value of the initial toner stored in the EEPROM of the developer unit, the output value of the T/C sensor is out of the range between +100 (undetection toner) and -1000 (Coming off of the sensor connector). And that status was detected 3 times continuously.
Remedy: Reinstalling the developer unit The developer unit is not properly installed. Reinstall developer unit BK so that the connector firmly connects. Developer Unit Replacement
: Checking the wire The wire is not properly connected or is faulty. Reinsert the following wire connectors, and replace the wires when they have no continuity.• Drum/developer relay PWB - Feed image PWB• Feed image PWB - Engine PWB Electrical Diagram of PWBs
: Replacing the drive gear The drive gear for developer unit BK is damaged. (The spiral is not rotated.) Replace the drive gear for developer unit BK.
: Developer unit replacement Developer unit BK (T/C sensor BK) is faulty. Replace the developer unit BK. Developer Unit Replacement
: Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Upgrade
: Replacing the drum/developer relay PWB The drum/developer relay PWB is faulty. Replace the drum/developer relay PWB. Drum/ Developer Relay PWB Replacement
: Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB.
: Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Engine PWB Replacement
#Kyocera
#developer
#BK