Project Tutorial Part 2 WFB-ng on Raspberry Pi CM4 with Ochin carrier board!
This is the second part of the Project Tutorials.
Part 1: • Project Tutorial Part 1 WFB-ng on Raspberr...
This Air Unit can easily fit on a 5” quadcopter!
In this part we will go through the process of installing the MIPI camera and the WIFI module. We will need a USB to UART cable and a USB to Ethernet adapter. You can buy any of your preferences from eBay/Amazon/Aliexpress etc.
I would also like to highlight a comment from the creator of the Ochin CM4, Flavio Ansovini:
“Just a suggestion, please use spacers between the two boards. without the spacers (as it can be seen even in the video) the boards tend to bend (the cm4 is even thinner then the ochin). In the long period this may cause the detachment of some pins or even break the mezzanine connectors. If you like you can find the 3D files for the turrets on the github repo, if you want you can use the freecad source files to modify it.“
I would like to personally thank him for all his hard work and it’s an amazing thing having people like Flavio🇮🇹 in the FPV community! Cheers mate!🎃🍻
Please watch the video until the end and then post in the comments section what you wish to see in the following parts.
The GitHub repo of the carrier board:
https://github.com/ochin-space/ochin-CM4
The Facebook group of Ochin CM4:
/ ochin.space
Join the community of WFB-ng:
https://t.me/EZWBC
Join the OpenHD Facebook community:
/ 956912811789726
Please subscribe! ❤️