Writing a program in Siemens NX for the Hub, part 2, and visualizing programs in CIMCO Edit.
In this video, I'll talk about writing the second setup for machining the Hub part. It will be done using the turning section, including drilling, thread cutting, and tooth milling.
Timecodes:
00:00 – INTRO.
00:23 – Machining geometry, axes.
00:40 – Adding a workpiece.
01:41 – Overview of the added tool.
02:50 – Overview of program folders.
03:10 – Facing.
04:53 – Rough turning external machining (ROUGH_TURN_OD).
05:01 – Finish turning (finish_turn_od).
05:28 – Rough turning internal machining (ROUGH_BORE_ID).
07:36 – Finish turning internal machining. Processing (finish_turn_id).
09:43 – Outputting the turning program to the postprocessor.
09:52 – Review of the second drilling and tapping program (DRILLING, COUNTERSINKING, TAPPING)
10:06 – Preliminary tooth root milling (PLANAR_MILL).
12:57 – Copying circle operations (Transform and rotate around a line operation).
13:48 – Finishing tooth root contour milling (WALL_PROFILING).
15:48 – Chamfering (CHAMFERING_MODELED).
17:00 – Outputting all remaining programs to the postprocessor.
17:23 – Parsing, reading, and visualizing programs in CIMCO Edit.
20:51 – Epilogue.
For channel advertising: Yandex wallet 4100117279968695
Link to the operational drawing: • Выполнение операционного эскиза обработки ...
Link to the casting: • Выполнение модели отливки с 3D модели дета...
Link to the Hub drawing: • Чтение чертежа детали Ступица (Компас 3D)
Link to the Hub modeling in NX: • Моделирование детали Ступица в NX / Modeli...
Link to the first part of the program: • Написание программы в Siemens NX на Ступиц...
Link to the VK group: https://vk.com/public204171721
#NX_lessons #First_technological #CIMCO_Edit