IPv6 static routing configuration in GNS3 by Devendra Pratap Singh || CCNA 200-301 | Network Creator

Опубликовано: 12 Март 2026
на канале: Network Creator

1,029

Configure IPv6 addresses and unicast routing on the router R1 & R2. Enable IPv6 routing on router R1 & R2. Configure the IPv6 addresses and routing on the rest of the routers. After the configuration of the IPv6 addresses and routing on each router, they are now ready for the configuration of the static routing.
After routing verify the route and destination address.
Static routing configuration :    • Static routing configuration in GNS3 || Ba...

GNS3 Installation:    • GNS3 installation and configuration full s...

Static routing:    • Static routing by Devendra Pratap Singh ||...

Routing introduction:    • Routing Introduction by Devendra Pratap SI...

VLSM Class C :    • VLSM C Class by Devendra Pratap Singh || N...

VLSM Class B :    • VLSM Class B by Devendra Pratap Singh || C...

FLSM class C Part 1:    • FLSM C-Class 50 hosts Part1  in Hindi by D...

FLSM Class B Part2:    • FLSM Class A Part 3 explained step by step...

FLSM Class A Part3 :    • FLSM Class A Part 3 explained step by step...

Subnetting Part1:    • Subnetting Part 2 in Hindi by Devendra Pra...

Subetting Part2 :    • Subnetting Part 2 in Hindi by Devendra Pra...

Subnetting Part3:    • Subnetting Part 3 in Hindi by Devendra Pra...

Subnetting Part4:    • Subnetting Part 4 in Hindi by Devendra Pra...

IPv4 Addressing Part2:    • IP Addressing in easiest way - Hindi (Part...

IPv4 Addressing Part3 :    • IP Addressing in easiest way - Hindi (Part...

IPv4 Addressing Part1:    • IP Addressing in easiest way -Hindi (Part ...

BGP introduction :    • BGP Introduction in Hindi By Devendra Prat...

BGP authentication :    • BGP Authentication configuration in GNS3 b...

Email id : [email protected]