Huawei Honor 10 Lite (HRY-LX1) FRP Done via Octoplus Huawei Tool
Welcome to Octoplus Huawei Software v.1.3.6.4
To enable 'Manufacture' mode dial
for Qualcomm and Hisilicon based models: #*#2846579#*#
ProjectMenu Background Settings USB Port Settings Manufacture Mode
for MTK based models: #*#14789632#*#
ProjectMenu Background Settings USB Port Settings Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 Communications Port
Job ID: 000000000191B723
2026-09-10 07:24:24
Starting Reset FRP
Selected phone model: HRY-LX1
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: Q7PRX18C08000295
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: HRY-LX1
System: HRY-LX1 10.0.0.198(C185E3R4P1)
Android Version: 10
Base Version: HRY-LGRP2-OVS 10.0.0.198
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
Reset FRP failed.
Performed by 1.3.6.4 Software version.
Job ID: 0000000001FE1A48
2026-09-10 07:26:01
Starting Read Info
Selected phone model: HRY-LX1
Searching Fastboot devices...
Found android device: Q7PRX18C08000295
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: HRY-L21
System: HRY-LX1 10.0.0.198(C185E3R4P1)
Android Version: 10
Base Version: HRY-LGRP2-OVS 10.0.0.198
C_Version: C185
D_Version: D000
Read Info done.
Performed by 1.3.6.4 Software version.
Job ID: 0000000001FE1A4F
2026-09-10 07:26:35
Starting Reset FRP
Selected phone model: HRY-LX1
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Canceling... Please be patient!
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Reset FRP canceled.
Performed by 1.3.6.4 Software version.
Job ID: 0000000001FE1A56
2026-09-10 07:27:20
Starting Reset FRP
Selected phone model: HRY-LX1
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: Q7PRX18C08000295
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: HRY-LX1
System: HRY-LX1 10.0.0.198(C185E3R4P1)
Android Version: 10
Base Version: HRY-LGRP2-OVS 10.0.0.198
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: HRY-LX1
System: HRY-LX1 10.0.0.198(C185E3R4P1)
MEID: A000009E12AAA9
IMEI A: 867182
IMEI B: 867182
S/N: Q7PRX18C08000295
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by 1.3.6.4 Software version.