deejayeye modder master tutorial 4 1 22
Patch has been fixed and is ready to go. If you fly in a NFZ frequently, try this and give feedback here. We would like to know what firmware you are running, stock, or mixed - and of course the results.
Go here: https://github.com/Bin4ry/deejayeye-m... (the new patch is included)
Get the patch-able .apk here: http://www.openpilotlegacy.org/dji.g....
Hear yah go bitches!!
How to fully remove NFZ from 4.1.22 GO and on your stock firmware drone WITHOUT mixing firmware.
These are instructions for MAVIC only for now. Manual instructions coming for Spark, and P4. Stay tuned.
Following these steps will allow you almost the full monty. All performance mods will work, but you still can’t bypass GO Altitude limits, but you can use stock firmware and NOT have to bypass NFZ in parameters. Yes, you read that right.
Tools/software needed:
· DUMLdore V3.03: https://github.com/jezzab/DUMLdore/re...
· Latest bin4ry/deejayeye-modder software: so you can patch GO and remove the NFZ from the app.
·DDD – DankDrone Downloader: https://github.com/cs2000/DankDroneDo...
·Latest GO4 v4.1.22 that is patchable: http://www.openpilotlegacy.org/dji.go...
·Jezzabs stage2.bin file: attached to this post below.
Without getting into the details of what jezzab has done for all of us…here is what you do:
1. Use DDD and download 01.04.0100/.0200 and or .0300. Not sure if .0300 will work, but you can try it.
2. Use DUMLdore V3.03 and flash your Mavic to the firmware of your choice in #1. Stock. No mixed firmware, and make sure it is stock, no f’ing around with the files on your bird.
3. Flash it again, just to make sure, to the same version. No really. Just do it. Stop whining.
4. Now, close DUMLdore . In the DUMLdore folder you will see the stage2.bin file. Rename this file so the program doesn’t use it. Replace that file with stage2.bin attached here.
5. Start up DUMLdore. Hold ALT and click the Load Firmware button. Firmware loads. Then click on Flash Firmware. You will see stage 1, then stage 2. You will see Completed. Exit DUMLdore and restart device. Then it will change to Flashing complete. Device may be powered off. Exit DUMLdore restart the Mavic and you are DONE.
If you flash ANY firmware again, it will put the NFZ back on the Mavic. Then you will need to do steps 4 and 5 again.
6. Don’t forget to rename the stage2.bin file back, or swap it out again.
7. Man up and send jezzab some LOVE via PayPal. This means you. All the OG’s work hard. Time to pay back and make someone happy. https://www.paypal.me/DUMLdore
Test in an area where you had NFZ warnings before, WITH PROPS OFF. I am NOT telling you to fly in a NFZ. Use your smarts. You are responsible for your flying. Not DJI.
*Note - I just worked with jezzab and he quickly changed DUMLdore to make the whole process easy with V3.03. Awesome!!
Attached Files Attached Files
File Type: zip stage2.zip (433.6 KB, 4 views)