Rearview Mirror with Dash Cam and Rearview Camera. Installation / Review / Test
I'm installing a rearview mirror with a dash cam and rearview camera from AliExpress on a Chevrolet Lacetti.
You can choose and buy a rearview mirror with a dash cam and rearview camera from AliExpress at this link: https://s.click.aliexpress.com/e/_DCn...
Save up to 90% on online purchases with a verified cashback service:
✅ LetyShops - https://fas.st/ybDqV2
You can support the channel with likes, shares, or financial contributions:
PrivatBank - 4149 6090 5865 1755 (Sergey Zaitsev)
We ordered the Jansite mirror from China. It arrived quickly and is of good quality. The kit includes the mirror itself, connection wires, a camera, and an additional card.
First, install the rearview camera. To do this, we test the mounting location on the trunk. I chose the plastic sun visor, placing the camera on the right side because the trunk handle and license plate light are in the center. We can also see the left side in the side mirror. The rearview camera should be pointed downwards so we can calculate the distance from the object we're approaching to the bumper. Once we've found the ideal mounting location, we disassemble the trunk. To disassemble the trunk, we remove all the decorative plastic and trim. I recommend using a trim removal kit https://s.click.aliexpress.com/e/_Dd8... - it costs pennies and won't damage the interior. We apply +12V from the reverse gear indicator, the bulb for which is located in the trunk lid, to the camera. We'll run the Mini Jack itself to the factory mirror. After removing all the plastic, disconnect all the connectors from the license plate light, unscrew the zip ties, and then remove the plastic cover above the license plate. When installing the camera, pull the wire along with the factory wiring and tuck the connector under the trunk lid. Next, connect the camera to the reverse sensor and check its functionality with an auto electrician's tester: the green wire is reverse, the black wire is negative. I pulled the cable under the rear lid using a plastic cable tie—it makes life much easier. Then, feed the wiring through the rubber conduit into the car's interior and route it under the roof to the driver's seat. After ensuring there's enough wire for the connection, drill a hole in the plastic trunk lid and mount the rearview camera. Now connect the camera charger, first soldering two wires to the positive and negative terminals, and connect them to the ground and ignition wire. The charger is now hidden from view, under the dashboard on the driver's side. We route the wires from the mirror with the dashcam to the charger under the headliner and the side plastic panel, securing them to the standard wiring harness. After installing the dashcam and rearview camera, be sure to test their functionality. It's also important to adjust the camera's angle so the driver can clearly see the distance to an obstacle. We left the camera angle just enough to show a portion of the car's bumper.
This completes the installation of the rearview mirror with the camera. The customer was satisfied with the installation. At the end of the video, he also showed how he films the rearview mirror with the dashcam and rearview camera from AliExpress.
Auto electrician Sergey Zaytsev has been working for you!
YouTube Channel - / АвтоэлектрикСергейЗайцев
Contacts for the Zaytsev service station - https://autozaycev.com
FB - / stozaycev
#автоэлектрик #видрайтор