XHC USB Mach3 Breakout Board 3 Axis USB Motion Control Card Resume 2000MHz
Electrical Characteristics:
CPU:Dual-Processors, ARM+FPGA
Axis output control:
Drive Current:Isolated open collector output; 5V, 20mA
Drive:Pulse + direction output
Output frequency:2000 KHZ (2MHz)
Axis:MK3-M4:6-axis
Isolation Voltage:3.5KV
Spindle inverter output
Analog voltage output:0-10V
PWM output:5V, 1KHZ, Duty; 0-100%
Pulse + direction output:5V, 15HZ to 4 KHZ
Spindle speed input
Input:Isolated input, 5V pulse signal
Isolation Voltage:3.5KV
8 IO output
Drive Current:Isolation: 50mA, 25V
Isolation Voltage:3.5KV
16 IO input
Input Current:Isolated inputs, 5 mA, maximum voltage 25V
Isolation Voltage:3.5KV
Mach3 Port Position:P1 Port
USB interface:Complies with USB2.0 standard
Package box size:275X144X42mm
Weigtht:0.7KG
Features:
Fully support all Mach3 version
Support save data when power off.
Support spindle speed feedback
Support 3 meter USB cable
Supports Up 6-axis
Maximum step-pulse frequency is 2000KHz.Status indicator LED can be useful to show the USB
Connection,and working status by flashing.
16 general-purpose input,8 output has speed function,the spindle actural speed Mach3
Interface in real-time display
All IO-port isolation,interference,stable performance
Ful support for USB hot-swappable,the card is Monitoring USB connection status at any time,
Key feature:
1.Standard usb device and work at all windows with usb hot plug.
2.The card state is monitored.
3.Support 6 axis to motion at the same time.
4.Step Pulse frequncy Up to 2000khz，support servo and step motor driver.
5.The usb state indication with led
6.All io is isolated,anti-noise and stable performance
7.Spindle control with PWM and step/pulse
8.Aluminum shell,shield the interference.
9.Speed index function.
10.Power off and continue function
Software installation:
First,install Mach3 software to your PC.
Second,copy your driver into Mach3.Check readme file in the CD.
Check our wiring for reference,connect our card to your machine correctly.
Connect your PC to our card by using network cable.
After these steps,you can open your Mach3 software for operating.
Please take a look at Mach3 software parameters setting,steps per and so on in the printed manual of our packing box for reference.
https://www.lollette.com/CNC/cnc-cont...
manual https://www.nvcnc.net/xhc-v-cnc-contr...