Make a Wi-Fi Repeater with ESP8266/ESP32 | No Extra Router Needed!
File Link:
https://drive.google.com/file/d/1BKCk...
"https://drive.google.com/file/d/1BKCk..."
🚀 Turn Your ESP8266 or ESP32 into a Powerful Wi-Fi Repeater!
In this video, I’ll show you step-by-step how to use the ESP8266 or ESP32 microcontroller to extend your Wi-Fi signal using Windows 10. Boost your internet coverage at home or in your IoT projects using this amazing trick. 💡
Whether you're a beginner or a seasoned maker, this tutorial will help you unlock the true potential of your ESP boards. All you need is your ESP8266 or ESP32 board, a USB cable, and a few minutes!
🔧 What You’ll Learn:
What is a Wi-Fi repeater and how it works
ESP8266 and ESP32 setup
Required tools and software (Windows 10 based)
Live testing of Wi-Fi range improvement
Troubleshooting and tips
⚡ Why You Should Try This:
Save money on expensive repeaters
Great for smart home & IoT setups
Easy to follow with hands-on demo
🖥️ Tested On:
Windows 10
NodeMCU ESP8266 & ESP32 DevKit
🔗 Download Links, Code, and Commands:
👉 [Add your GitHub link or Google Drive folder here]
💬 If you have any questions or issues, drop them in the comments — I reply to everyone!
🔔 Don’t forget to LIKE, SHARE, and SUBSCRIBE for more ESP & DIY tech videos!
#ESP8266 #ESP32 #WiFiRepeater #Windows10 #IoTProjects
------------------------------------------------------------------------------
Time span
------------------
0:00 Start
1:47 Esp 32
6:29 Esp 32 Configuration
9:52 Esp 32 Speed test
10:52 Esp 8266
14:30 Esp 8266 Configaration
17:45 Esp 8266 Speed test
------------------------------------------------------------------------------
Steps______
Step 1: Upload the code to the ESP.
Step 2: Disconnect and reconnect the ESP power.
Step 3: Wait for the hospital signal from the ESP. If the ESP hotspot is visible in Wi-Fi, connect to it.
Step 4: Configure the ESP with patience. The ESP is accessible at 192.168.4.1. Use any browser to open this IP address.
You can see the ESP status on the 192.168.4.1 webpage.
How to check if the ESP is connected to the router?
On the webpage, you can see the signal strength.
You can also see how many devices are connected to the ESP hotspot.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Abandoned & GalaxyTones - Luna (Feat. DNAKM) [Mendum Remix] [NCS Release]
Music provided by NoCopyrightSounds.
Watch:
• Abandoned & GalaxyTones - Luna (Feat....
Free Download / Stream: https://ncs.io/LunaRMX
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Cartoon, Jéja - On & On (feat. Daniel Levi) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: http://ncs.lnk.to/OnandOnAT/youtube
Free Download / Stream: http://ncs.io/OnandOn
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Song: Jim Yosef - Link [NCS Release]
Music provided by NoCopyrightSounds.
Watch:
• Jim Yosef - Link | Melodic House | NC...
Download/Stream: http://ncs.io/LinkYO
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Julius Dreisig & Zeus X Crona - Invisible [NCS Release]
Music provided by NoCopyrightSounds.
Watch:
• Julius Dreisig & Zeus X Crona - Invis...
Free Download / Stream: http://ncs.io/InvisibleYO
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Lost Sky - Where We Started (feat. Jex) [NCS Release]
Music provided by NoCopyrightSounds.
Watch:
• Lost Sky - Where We Started (feat. Je...
Free Download / Stream: http://ncs.io/WhereWeStarted
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: http://NCS.lnk.to/MortalsAT/youtube
Free Download / Stream: http://ncs.io/Mortals
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -