How to Configure VLANs on a BDCOM GPON OLT & SFU ONU | Step-by-Step Web Interface Guide | GP3600-B
📝 YouTube Video Description
Welcome to this VLAN configuration tutorial for BDCOM GPON OLT and SFU-type ONU devices.
In this video, we guide you through a complete, step-by-step process of configuring VLANs on a BDCOM GPON OLT and applying VLAN profiles to connected SFU ONUs using the Web Interface.
📌 What You Will Learn
✔️ How to log in to the OLT Web Interface
✔️ How to create single or multiple VLANs on the OLT
✔️ How to set VLAN mode for uplink and GPON ports
✔️ How to configure access and trunk VLAN scenarios
✔️ How to create TAG and TRUNK VLAN profiles for SFU-type ONUs
✔️ How to apply VLAN profiles to ONU LAN ports
✔️ How to save configuration and verify connectivity
📌 Notes
When working with VLANs in GPON networks, uplink encapsulation uses dot1Q by default.
TAG and TRUNK profiles are applied per LAN port of the SFU ONU.
If you found this tutorial helpful, don’t forget to like, subscribe, and leave your questions in the comments below!