How to replace Kyocera P3145 Developer Unit
Hey everyone, today we will discuss: How to replace Kyocera P3145 Developer Unit
Part numbers:
DV-3100, 302LV93080, 302LV93081, 302LV93082
Common error codes: Related to Developer
Code 7100 - Toner sensor error
Code 7400 - Developer unit non-installing error
Image Quality problems:
No Image appears (entirely white), Image is too light, White/Black streaks are printed vertically/horizontally or Repetitive defects.
Recommended action:
Reinsert the connector. Also check for continuity within the connector cable. If none, replace the developer unit.
Print quality repetitive defects gauge 44.9 mm/ 1 3/4” Developer roller
Replace the developer unit.
New Developer: Initializing the developing unit (toner install mode)
The new developing unit is shipped from the factory with no toner contained. The developing unit can be automatically replete with toner when a toner container is installed onto it and the printer is turned on. However, because the toner reservoir in the developing unit has a large capacity, it requires a lengthy period of time until a substantial amount of toner has been fed to get the printer ready.
(A new developing unit needs approximately 200 g for triggering the sensor inside.)
Purpose: To execute when the developing unit has been replaced.
1. Enter the Service Setting menu.
2. Select [New Developer] using the cursor up/down keys.
3. Press the OK key.
4. Select the [YES] using the left select key.
[Accepted] is displayed.
The toner installation is performed when power is turned on and off.
NOTE: Toner supply is stopped when toner installation mode is performing.
Compatible Models:
ECOSYS FS-2100DN
ECOSYS FS-4100DN
ECOSYS FS-4200DN
ECOSYS FS-4300DN
ECOSYS M3040idn
ECOSYS M3145idn
ECOSYS M3540idn
ECOSYS M3550idn
ECOSYS M3560idn
ECOSYS M3655idn
ECOSYS M3660idn
ECOSYS M3860idn
ECOSYS M3860idnf
ECOSYS P3045dn
ECOSYS P3050dn
ECOSYS P3055dn
ECOSYS P3060dn
ECOSYS P3155dn
Purchase parts here:
302LV93080, DV-3100 - KYOCERA DEVELOPER UNIT - https://www.iteminc.com/developer-uni...
Don't forget to visit our website
Call us at (800)- 367-4836
https://www.iteminc.com/?utm_source=y...
https://www.facebook.com/iteminc?utm_...
0:00 Intro
0:38 Open the top cover
0:43 Remove Toner Container
0:54 Open the front cover
1:01 Slide the Drum Unit out
1:08 Release the container guide
1:19 Disconnect the Developer cable
1:29 Remove the Developer Unit
1:41 Replace with new Developer Unit
1:50 Reconnect the Developer cable
2:05 Insert the Toner Container
2:14 Close the front cover
2:22 Close the top cover