How to DIY Your IP-KVM Via PiKVM-A3 for Raspberry Pi 4 Open-source KVM Over IP?
Update:
1. The X630-A3 V1.2 has been updated since X630-V1.3 and remove one on-board spacer to simplify the installation.
2. The 10pin I2S cable has been added since October 2023, how to use please refer to: https://wiki.geekworm.com/KVM-A3#Enab...
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols or services!
User Manual: https://wiki.geekworm.com/PiKVM
Aliexpress Shop: https://www.aliexpress.com/item/10050...
Geekworm Official: https://geekworm.com/products/pikvm
Note:
1. PiKVM-A3 expansion board kit is also compatible with Raspberry Pi 3B+/ 3B, but since Raspberry Pi 3 without OTG interface, when PiKVM-A3 is used with Pi3, OTG analog keyboard and mouse cannot be used.
2. Some PC case may not have HDMI port, you need to use VGA/DVI to HDMI adapter to tansfer HDMI port.
3. Please use the supplied USB Type-C to USB 2.0 A-Male Cable only. USB-C to USB-A cable only with DATA lines (for keyboard and mouse emulation), using other cable might cause instability or damage to either the host PC or the Pi.