🚀 Build a Raspberry Pi CCTV with Software Motion Detection (2025 Tutorial)
In this step-by-step tutorial, I’ll show you how to turn a Raspberry Pi 5 + USB camera into a powerful motion-activated security system using MotionEyeOS. Perfect for home security, pet monitoring, or DIY tech projects in 2025!
🔧 What’s New in 2025:
✅ Optimized for Raspberry Pi 5 (faster processing)
✅ Updated MotionEyeOS configurations for better accuracy
✅ Low-power mode tips for 24/7 operation
✅ Integration with Home Assistant 2025
Extra command:
Service Config:
sudo nano /lib/systemd/system/motion.service
Motion Config: sudo nano /etc/motion/motion.conf
Reload and restart:
sudo systemctl daemon-reload
sudo systemctl restart motion
sudo systemctl enable motion # Enable on boot
📦 Hardware Used:
Raspberry Pi 5 (or Pi 4/400)
USB Camera.
All instructions in the video, commands are indicated on subtitles.
⚠️ Disclaimer: This is for educational purposes only. Use only legal software and comply with local privacy laws.
#RaspberryPi2025 #DIYSecurity2025 #smarthome2025 #ai