Creality Ender 3 V2 - Fast, Easy Way to Level Your Print Bed
If you want a good print, and a strong bond to the build-plate , you need to have the bed the right distance away from the nozzle, the standard way to do this is to move the printer in X and Y to each corner through a manual and slow process which doesn't always give great results. I've come up with a fast and simple method to level your bed quickly and easily for every print. This works with the print, or as a stand-alone print as well.
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link: / needitmakeit
I personally like to keep my printers as close to stock as I can so that I avoid added complexity and avoid replacing anything that breaks down. A BL touch is a normal solution for getting good bed adhesion, however if you've just purchased one of these printers you may not want to spend the extra money on one. Hopefully this video can help you to achieve good results every time.
Some parts are hard to remove when using glue stick because the bond is so good, a 10 minute trip into the freezer will easily separate them from the build plate.
Skirt Only Programs (220N 60B)
0.4mm Nozzle - 0.2mm Layer Height - https://drive.google.com/file/d/1JiX8...
0.5mm Nozzle - 0.2mm Layer Height - https://drive.google.com/file/d/1Bhc3...
0.6mm Nozzle - 0.2mm Layer Height - https://drive.google.com/file/d/1bB3z...
0.8mm Nozzle - 0.2mm Layer Height - https://drive.google.com/file/d/14aTz...
Most current PLA Profile 0.4 nozzle:
https://drive.google.com/file/d/1Y6DB...
A higher or lower nozzle temp and speed can be manually tuned on the printer using these programs
The links below are affiliate links, a small % of any sale goes towards making future videos for this channel and thank you everyone for your interest and support!
Capricorn XS PTFE - https://amzn.to/3jnwbYw
Raspberry Pi 4 Computer 2gb - https://amzn.to/37IN6kD
Pi Camera V2 - https://amzn.to/2HA6LZe
Long Cable - https://amzn.to/2HzdQJq
Power Cable - https://amzn.to/3jzEjDI
Raspberry Pi 4B ABS Case W/ Fan and Heatsinks - https://amzn.to/3mpJCrm
#ender3
#3dprinting
#Problemsolving