#unv
ADD #Dahua #camera to a#Uniview PoE #NVR
Step 1. Log into the camera’s web service
Use Internet Explorer or Mozilla Firefox to log on the camera by typing the camera’s IP address into the browser address bar. For example http://192.168.1.108. Enter the username and password.
If you are unable to pull up web service with the default IP address you may need to change the IP to match your network scheme. Use the Dahua’s Config Tool to scan your network and modify the IP of the camera.
Step 2. Set the camera to DHCP
Once login open the Setup tab on the top right of your browser. Then click Network on the left column and select TCP/IP under this section. You will then select the DHCP button and then click Save.
Step 3. Set the camera’s correct Time Zone
Select System then General on the left side column. Then select the Date&Time tab and change the Time Zone in the drop down to the correct GMT that matches the NVR, and click Save. Note: the NVR’s GMT