0:00 Wemos D1 mini Lite (ESP8285) introduction
0:14 WS2812B RGB Shield
0:58 Matrix LED Shield
1:41 Buzzer Shield
2:14 Battery Shield
2:33 Dual/Tripler base
3:13 Micro SD Card Shield
3:29 SHT30 Shield (air temperature/humidity meter)
4:20 OLED Shield
Where to buy:
Wemos D1 WS2812B RGB Shield: https://s.click.aliexpress.com/e/_mPC...
Matrix LED Shield: https://s.click.aliexpress.com/e/_omy...
Buzzer Shield https://s.click.aliexpress.com/e/_Ewv...
Battery Shield https://s.click.aliexpress.com/e/_mOW...
Tripler Base/Wemos D1 Dual Base: https://s.click.aliexpress.com/e/_mLH...
Micro SD Card Shield: https://s.click.aliexpress.com/e/_mPw...
SHT30 Shield: https://s.click.aliexpress.com/e/_mLl...
OLED Shield: https://s.click.aliexpress.com/e/_msh...
Connectors and cables for battery shield: https://s.click.aliexpress.com/e/_mtT...
Sources:
How to setup Wemos D1 mini Lite (ESP8285)
If you miss your Lite board in Arduino IDE update your boards.txt-add these lines (see the link below)
https://gist.github.com/xxlukas42/dc3...
Wemos D1 WS2812B RGB Shield
https://gist.github.com/xxlukas42/793...
this example uses Adafruit NeoPixel library from
https://github.com/adafruit/Adafruit_...
Matrix LED Shield
this example uses Matrix LED Shield Arduino Library from
https://github.com/wemos/WEMOS_Matrix...
https://gist.github.com/xxlukas42/793...
Buzzer Shield
example: https://gist.github.com/xxlukas42/793...
SHT30 Shield
this example uses WEMOS_SHT3x_Arduino_Library from
https://github.com/wemos/WEMOS_SHT3x_....
https://gist.github.com/xxlukas42/793...
Note: you should not use this shield directly on Wemos board but rather to use it together with dual/tripler base to prevent temperature distortion caused by heat from the board (+5 C).
Wemos D1 OLED Shield
this example uses Matrix LED Shield Arduino Library from
https://github.com/sparkfun/SparkFun_...
example source (scrolling text):
https://gist.github.com/xxlukas42/793...
Music:
/ 12-oclock
==========
#plukas #wemos #wemosshields