How to use NCK Pro box to flash Spreadtrum (SPD) firmware
Download links & Text format @ https://forum.hovatek.com/thread-2272...
This video explains how to use NCK Pro box to flash Spreadtrum (SPD) firmware or pac file.
NCK Pro Box SPD module requires a hardware box to work so ensure you have it. Also install Spreadtrum SCi USB drivers as instructed at https://forum.hovatek.com/thread-827....
Drop a comment below if you have questions or reach out to us on the following platforms:
Website: https://www.hovatek.com
Facebook: / hovatek
Twitter: / hovatek
Google+ : https://plus.google.com/+Hovatek
00:10
In this video tutorial, I'll be explaining how to flash a firmware or pac file to a Spreadtrum
00:16
Android device within NCK Pro box Spreadtrum module. First off, You need to have the
00:22
hardware box and You need to have set it up. We have a guide on how to do that. You also need to
00:26
have installed your USB drivers; Your Spreadtrum USB drivers. We also have
00:31
a guide for that. You need to have installed the NCK box Spreadtrum module. We have a tutorial
00:37
for that and of course You need to have the firmware which You intend to flash. Mine is a
00:42
PAC file. alright? and then of course You need to have the
00:46
Spreadtrum phone which You intend to flash. Powered off, still with battery in but not
00:51
connected to the PC yet. Now, with all these in place, the next thing You want to
00:55
do is to run the NCK Spreadtrum module. I prefer to run as Administrator
01:03
so I don't run into permission issues because sometimes You might have some
01:07
permission errors when flashing or backing up alright? So just to avoid
01:12
anything like that, I prefer to run all my modules as Administrator. So I'm
01:18
waiting for the dashboard to come up and then we can proceed. Alright! Great!
01:27
so the dashboard is up. Great! Now, the next thing You'll want to do
01:33
is to come under the Pac Flasher tab then You'll want to click on Open PAC file.
01:39
Now, in this Windows that pops up, You navigate to the location where your .pac file is, You
01:43
highlight it and then You click Open. That will display the pac file's detaiils
01:50
aright? Now, you can decide to come under Firmware Settings and I'll explain what
01:55
that does. Now, under Firmware Settings, You can decide to flash all partitions or You
01:59
select partitions to flash. Now, it's going to flash all partitions
02:05
which I have ticked here alright? So let's say I want to flash just recovery
02:09
I am going to untick everything and leave just recovery but don't forget
02:14
that fdl 1 & 2 should be left ticked. These ones are mandatory alright? So I'm
02:20
going to untick every other one except recovery and my fdl files alright? I
02:27
just want to do this to make flashing fast but if You really want to flash all
02:32
partitions, just go ahead and skip this Firmware Settings alright? So
02:39
I have only recovery ticked and my fdl 1 & 2 so I'll just come down here and click
02:46
OK. Alright! Great! now this Repartition
02:50
option is for if You want to rewrite the partition table before flashing the
02:57
files to the various partitions okay? Its the equivalent of Firmware Upgrade in SP flash
03:02
tool. So if You don't want to do that or if
03:05
You don't know what this actually does, You can just leave that unticked. If you just
03:10
want to do a normal flashing just leave that unchecked okay? Alright! Next up,
03:15
You'll want to click on Flash Phone. Now, once You see "Keep key until boot
03:21
complete", You power off the Spreadtrum device, still battery in it, You hold the
03:26
volume down button okay? and then You connect to the PC via a USB cord. For some
03:33
phones, its actually the volume up button like this particular one I'm holding
03:36
everything on this phone is the other way around
03:40
okay? So instead of me holding volume down, which I normally do on other Spreadtrum phones, I
03:44
have to hold volume up okay? So if you find that volume down is not working just
03:50
switch to volume up. So this is writing my recovery. Don't forget I picked just recovery
03:57
to make this flashing process complete quickly. Alright! Great! Done! So I can
04:06
disconnect and power up the device. I have a done message okay? So that's basically how
04:14
to flash a firmware or pac file to a Spreadtrum Android device using NCK
04:19
box Spreadtrum module. --------------------------
Hire Or Consult Us
https://www.hovatek.com/remote
Join Our Training
https://www.hovatek.com/training