syringe labeling machine semi automatic manual pharmaceutical labeler equipment Etikettiermaschine
After we received the samples from Tony Liu who sent us
5 different sizes of syringes plus two sorts of lables.
we tested the machine semi automatic labeling equipment
accordingly last saturday (7th Dez) with sucessful trial run .
As follow is the detailed files of labeling machine with customer-offered
syringes and labels filming date 07-12-2013
syringe labeling machine semi automatic manual pharmaceutical labeler equipment Etikettiermaschine designed and manufactured by our engineer team in cosmetic&food&pharma making and packaging machinery is widely used in the daily chemical industry like the syringe labeling machine semi automatic manual pharmaceutical labeler equipment Etikettiermaschine.We as a famous manufacturer moreover can design and produce the packaging machine according to the special requirements from customers.
Damit is about how to install the machines labeling step by step:
The sixth part Operational processes
1， Install
Refer to the packing list, labeler is installed as indicated. Machine packaging packing slip-free, can be used directly.
2， Loading labels
2.1 Release the seven words on the tray handles remove tray, volume label, then tray lock (be careful not to clamp too tightly, to hand to drag the label is preferred).
3， Round labels
Follow drawn around the plotting and the labels right on bypass machine.
4， Debugging
In point State, observe the electric eye changes, label with the label gap time, jealous led lit (output signal). If the status of the electric eye is not normal, please refer to the electric eye adjustment section, adjust the electric eye.
5， Try running:
Automatically run State, step on foot switch once, observe the position of the label in the Peel Board.
6， Position adjustment
1. observation of Peel Board position, use the move method to mark Deng stripping 0~2mm. (A bid for too long will cause the product to stick to the next label, finished too short can cause the product to stick a label)
2. adjust the length mark appropriate cases, and then by moving the electric eye position, move the electric eye testing slot to gap labels and label. Then, switch to automatic status, step on foot switch, automatically stop and then watch out location of length is appropriate, make the appropriate adjustments.
2.1 You can move up and down the length of the standard electric eye ways to reach, move up, early detection labels, label stripping length shorter. Moving down, delaying testing label, label stripping length longer.
2.2 Twin standard adjustments, paying special attention to magic eye location, if you are out of the Peel Board is marked, then corresponds to the electric eye that you want to test is marked on the . The following diagram 1 If out of the Peel Board is back labels, electric eye position shown 2 , And then click move 2 To adjust the distance between two labels.
7. try stickers
Place the product on the labeling station, observe the label position on the workpiece, by moving the left side of the location bar to adjust the label attached to the workpiece position.
After following the steps above a good tune labeling machine, can be carried out properly labeling.
8. shut down
Labeling is complete, power off in a timely manner, long periods of inactivity, unplug the power socket.
Second, pay attention to matters
1. the correct label
1.1 Label once completed, switch to the manual, please make sure the power is connected, Governor is open, and then press the "jog" switch, so traction pulling paper about the end of 0.5 Meters, aims at keeping the paper free to correct at the end of.
1.2 . When the end of the paper automatically corrected, we will all adjust rollers on the limit circle, move the limit circle on both sides of the paper. When you replace the label at a later date, label is placed directly inside the limit. When replacing the different width of label, generally move only limit on the right ring, as a base-level on the other side, General recommends that you do not move.
Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery like syringe labeling machine semi automatic manual pharmaceutical labeler equipment Etikettiermaschine,please email via [email protected] or browse our website http://penglaichina.com.
Follow us on twitter: / jackdu007
Like us on facebook: / jackdu999
Skype us by :turnanewleaf
Call us via:0086-15811882441