LAB 1.6.1 - Ch1 - Packet Tracer Skills Integration Instructions.mp4
Objectives
• Design and document an addressing scheme based on requirements.
• Select appropriate equipment and cable the devices.
• Apply a basic configuration to the devices.
• Verify full connectivity between all devices in the topology.
• Identify layer 2 and layer 3 addresses used to switch packets.
Task 1: Design and document an addressing scheme.
Step 1: Design an addressing scheme.
Based on the network requirements shown in the topology, design an appropriate addressing scheme.
• Starting with the largest LAN, determine the size of each subnet you will need for the given host
requirement.
• After the addresses have been determined for all the LAN subnets, assign the first available
address space to the WAN link between B1 and HQ.
• Assign the second available address space to the WAN link between HQ and B2.
(Note: Remember that the interfaces of network devices are also host IP addresses and are included
in the above addressing requirements.)
Step 2: Document the addressing scheme.
• Use the blank spaces on the topology to record the network addresses in dotted-decimal/slash
format.
• Use the table provided in the printed instructions to document the IP addresses, subnet masks
and default gateway addresses.
For the LANs, assign the first IP address to the router interface. Assign the last IP
address to the PC
For the WAN links, assign the first IP address to HQ