Incredibly simple! Edinger A8 sliding gate automation - do-it-yourself installation
buy for yourself: tel.....+380675027189
articles dealer: tel.....+380631825596
You can get a certificate for a discount of 500 UAH (for the purchase of accessories) here - https://novi-vorota.com.ua/ua/sertyfi...
You can get a drawing of a sliding gate here - https://novi-vorota.com.ua//ua/cherte...
You can read about Edinger A8 automation here - https://novi-vorota.com.ua/ua/edinger...
We will install Edinger A8 sliding gate automation at this facility. It exactly meets all the criteria by which we select - a metal gearbox, magnetic limit switches, a simple functional board. Before installing the drive, first you need to prepare the mounting base, weld 80*40 mm tubes to it. Then install the drive on it and screw it with bolts. Cut one edge (which is attached to the foundation) at an angle so that there is a gap. Place the resulting structure on the channel and weld it. Next, attach the toothed rack, not forgetting the gap between the teeth of the rack and the gear of 1 mm. Connect the drive to the power supply and configure it. Also install and connect the signal lamp.