Lesson 10 - Modeling Cold Water Distribution - Basic Revit MEP Course
Advanced Course "What They Didn't Teach You About Revit MEP":
► https://www.erikcavalcanti.com.br/oqn/
Free Basic Revit MEP Course | ERIK BIM
Download course files and issue your certificate:
► https://www.erikcavalcanti.com.br/cur...
Special thanks to the Studio Ideia team who provided the architectural plans, and also to the engineer who did the structural modeling for free! Follow them on social media:
► / crudsp1ps_m
► / baldeonengenharia
____________________________________________
00:00 – Reviewing the cold water project draft.
02:16 – Creation and configuration of the roof floor plan.
03:00 – Positioning the water tank and verifying the space allocated for it in the architecture.
04:35 – Laying the PVC cold water pipes from the water tank.
06:07 – Inserting the pressure booster.
07:57 – Laying the bypass.
12:30 – Laying the Y-strainer and nipple.
14:58 – Correcting the material of the threaded coupling.
17:15 – Matching the pipes with the position of the access door to the water tank.
19:06 – Laying the water tank and the bathroom water supply piping.
23:39 – Inserting the gate valve and the pressure regulator.
25:50 – Finishing the area with the cold water point for the sink and the bidet shower. 30:47 – Connecting the ventilation pipes above the overflow level.
31:40 – Adding the siphon in the bathroom and making adaptations to avoid conflict.
#revit #revitmep #bim #plumbing