How to erase or Factory Default Huawei OLT | Technical hakim
How to reset/erase or Factory Default Huawei OLT.
How to erase or Factory Default Huawei OLT | Technical hakim.
Hello! Today I will show how to do Huawei OLT Factory default or erase all configurations from Huawei OLT. So please follow this procedure.
The erase flash data command is used to erase the configuration data in the flash memory of the control board. When the configured data is saved to the flash memory, you can run this command to restore the database to the initial state, namely, to erase the data configured by the user. After the command is executed successfully, the original configuration data in the flash memory of the control board is lost.
Usage Guidelines:
1. Before erasing the data, run the backup data command to back up the database file to prevent the loss of important data.
2. Before erasing the data, check the autosave configuration status by display autosave configuration command, if it is enabled, please disable your autosave time & interval by command: autosave time off & autosave interval off.
3. During the process of command running, the system prompts you to confirm this operation.
4. During the process of command running, the system displays the progress, the suggestion when this command is executed successfully, and the cause in case of failure.
5. After this command is executed successfully, the system displays the message that the configuration takes effect after the active control board is reset. Run the reboot command to reset the system so that the data in the database is cleared.
6. After the data is erased, you can run the load data command to reload the database file.
we will erase the present configuration on olt and revert it to factory default.
##Huawei OLT Factory default Example:
To erase the configuration data of the active control board, do as follows:
huawei#erase flash data
active
Command:
erase flash data active
This command will clear the active board data that has been loaded or saved
Please remember to backup the system configuration data
Are you sure to continue? (y/n)[n] y
Command executes successfully, and will take effect after active board rebooted
huawei#erase flash data
standby
Command:
erase flash data standby
This command will clear the active board data that has been loaded or saved
Please remember to backup the system configuration data
Are you sure to continue? (y/n)[n] y
Command executes successfully, and will take effect after active board rebooted.
huawei#reboot
system
Command:
reboot system
Please check whether data has saved, the unsaved data will lose if reboot
system, are you sure to reboot system? (y/n)[n] y
System Response:
The system displays the message “Command executes successfully and will take effect after system rebooted” after the configuration data in the flash memory of the control board is erased successfully.
the system i.e. OLT after reboot will revet with factory default.
in a live network make sure you have a backup configuration before erasing to avoid data losses.
#technicalhakim #huawei #huaweiolt #oltconfiguration #ftth #gpon #olt #huaweioltconfigurations
Basic OLT configuration step by step,
Huawei SmartAX MA5608T Configuration & Commissioning,
Huawei GPON OLT Configuration by Command Line,
Huawei GPON OLT Configuration,
Performing the OLT Basic Configuration,
steps for configuring a Huawei OLT.
https://technicalhakim.blogspot.com/
https://technicalhakim.com
@TechnicalHakim