Applying decorative plaster. DIY wet silk
We're continuing our video series on applying decorative plaster. In this episode, we'll be exploring the "Wet Silk" effect. We'll be using Qucon's Decor Silver Silk decorative plaster, which creates a silky effect. This effect is easy to create, especially if you use a special material. The first layer should be a primer/paint pre-tinted to match the material's color to even out the absorbency of the substrate. We'll use a velor roller. After the primer/paint has dried, sand the substrate with fine sandpaper (220 grit), removing any excess shagreen and any loose material. Apply the second layer of decorative plaster to a small area with a clean velor roller, then create a pattern with a trowel using a "figure eight" motion. The entire application and creation of the "Wet Silk" effect is clearly demonstrated in this video.
Website: https://baueco-decor.ru
VK Group: https://vk.com/club211762270
Tint Color: NCS - S2500 - N
Music:
bensound-summer
Find Your Way Beat - Nana Kwabena