Lychee Slicer 5 and the new Anti Alias settings
Alright so Lychee decided with version 5.0 to change the language for the AA settings. We discuss what each setting means, and why you might want to use them.
Model credit:
Crippled God Foundry
https://www.myminifactory.com/users/c...
/ crippledgodfoundry
Check out our 3D Printing info:
Angle guide:
Angle Equation:
0.50 represents the layer height you are printing.
0.35 represents the printer's max resolution, in this case 35 microns.
Put this into Google:
arctan (0.50 / 0.35) in degrees
You get this 55.0079798 degrees or 55, so when doing the angle for bases, and flat objects remember the angle degree and use that to angle the objects.
Here it is with the numbers zeroed for you, just add the resolution of your printer and the layer height you are printing at.
arctan (0.00 / 0.00) in degrees
Check us out on Instagram too:
/ printmy3dmini
Just give us a follow on instagram, and be sure to share this with your friends!
My Lychee Slicer support settings for minis.
Super Light and Light supports
1.15 - 1.22 bar diameter
0.22 - 0.15 tip diameter
3.10 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .29, raft is .50
Mediums
1.33 - 1.44 bar diameter
0.33 - 0.44 tip diameter
3.00 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
I rarely use heavy supports, but these are my settings for HEAVY
Heavy
1.55 - 1.75 bar diameter
0.55 - 0.75 tip diameter
4.00 - 5.35 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
Happy printing!
/ @iprint3dminis
/ printmy3dmini
https://www.etsy.com/shop/PrintMyMini
http://printmymini.store
http://printmymini.com/