[Input Modules | Gesture]1D Gesture Recognition Module Gen2 BM32S3031-1
📌1D Gesture Recognition Module Gen2 BM32S3031-1
💻More Information: https://www.bestmodulescorp.com/BM32S...
00:00 00:13 Demo Operation
00:14 00:26 1D Gesture Recognition Module Gen2 BM32S3031-1
00:27 00:47 Product Features
00:48 00:58 Pin Description
00:59 01:04 Required Materials
01:05 01:26 Getting Started
01:27 01:35 Getting Started - Installation
01:36 01:52 Open the Arduino IDE
01:53 02:12 Demo Operation
02:13 02:47 Module Application
02:48 02:58 www.BestModulesCorp.com
✒Description
The product is an Infrared gesture recognition module integrated with algorithms capable of recognizing swipe left, swipe right, and hover gestures. The sensing distance of the X-axis can reach ±7.5cm, while the sensing distance of the Z-axis can reach 25cm. It is suitable for applications in smart appliances, light controllers, and other related products.
The product has built-in two infrared transmit LEDs and a sensor. Upon being powered on, it will enter sleep mode and sense for proximity every 128ms (configurable).
When proximity is detected, the product will wake up and measure changes in light reflectance at each of the infrared transmit LEDs over time, translating those changes into gestures. If no proximity or gesture is detected within 2 seconds (configurable), the product will return to sleep mode.
▓Distance learning
The maximum sensing distance of the product is 25cm. You can configure the distance to a range of 12cm to 25cm.
Steps for distance learning:
To change the infrared detection position, place something, such as a sheet of paper, in front of the infrared sensor of the product. For example, if you want to change the distance to 15cm, place something in front of the infrared sensor from a distance of 15cm.
Issue the command to the product to enter the distance learning mode.
After learning, the product returns the command. You can determine whether distance learning was successful from it.
⬥ Refer to the "Special Commands" paragraph on page 8 of the datasheet for more information.
✒Features
◆Operating voltage: 3.0V~5.5V
◆Operating current: 1.8mA @3.3V
◆Sleep mode current: 45μA @3.3V (senses every 128ms, configurable)
◆Supported gestures: swipe left, swipe right, and hover
◆Sensing range:
→X-axis: ±7.5cm
→Z-axis: 1~25cm
◆Interface: UART (baud rate: 9600bps)
◆Dimension: 30 x 8 x 10.5 mm
◆Net weight: 1.9g
🏢 Best modules corp.
🔗NO. 3, Creation Rd. II, Science Park, Hsinchu 30077, Taiwan
🤝[email protected]
#SensorModules #InputModules #GestureSensor #Module #DetectionModule #GestureDetector #1DDetector #sensor #BMduino-Shield #Shield #Arduino #BMduino