Use a Raspberry Pi to remotely access your office or any network
In this video, you'll learn how to use a headless Raspberry Pi to remotely access a Mac on another network, or any network. Learn how to use Remote.it to setup secure, remote access with no open ports. We'll be using a Windows machine to access the Mac.
What you'll need before you get started:
Raspberry Pi with an internet connection
The device (physical or cloud) that you wish to connect to remotely
A computer with VNC capabilities
A Remote.It account - Signup at: app.remote.it
*Make sure you write down the IP address of the Raspberry Pi as well as the IP of any device you wish to access.
*You must be on the same network as the Raspberry Pi to SSH into it initially. Once setup, Remote.It will allow you to access the Pi on a different network.
0:00 Introduction
0:30 What you'll need
0:45 Step 1: Setup the Raspberry Pi
1:16 Step 2: Install Remote.It on the Raspberry Pi
2:22 Add a VNC Service to access the Mac computer
3:17 Setup VNC Viewer with the URL generated by Remote.It for your Mac
URLs from the Video:
Headless Raspberry Pi Configuration:
https://www.raspberrypi.com/documenta...
Download VNC Viewer:
https://www.realvnc.com/en/connect/do...
Remote.It Web App: app.remote.it (recommended for most use cases)
Download the desktop application: https://www.remote.it/download (if you need to remotely connect to the device)
Connectivity as code. Make any device remotely accessible. No port forwarding required.
Visit our website at: https://remote.it
For more information or additional guidance, please contact: [email protected]
OR
Visit our support site:
https://support.remote.it
Follow us at:
https://remote.it
/ remote_it
/ remote_it_jp
/ remot3.it
/ remoteit