Nokia 216 Lcd Light Solution RM-1190 Display Light Solution RM-1187 Display Light Jumper 100% Work
#Nokia #rm_1190 #lcd #Light
Nokia 150 model RM 1190 lcd light solution jumper this point Connect to second front
This normally happening after connection brakes.Check this paths as showing this picture and give jumper using copper.
Nokia 150 RM-1190 Display Light Problem Ways Solution
Nokia 150 Display Ways Backlight Solution LCD Light Not Working Problem Repair Display Fault LCd Ways
here’s the dual sim Nokia 150 RM-1190 display connection line paths is case you are going to troubleshoot display problem such blank display, dark screen display, white screen (with tones), No backlight LED that is resulted from due to wet damaged or accidentally dropped issues bu the users.
Manual Solution is basically only for low light and Backlight issue, and in order to resolve that all you have to do is to go into settings and check for brightness (Remove check on Automatic Brightness). For Backlight, check backlight settings and timings.
Hardware Solution
Check the LCD for possiable damaged, cracked or broken. Replace if necessary.
Check the device firmware, and do a self test and calibration method. update or flash the firmware if necessary it uses RM-1190 firmware version.
Check the LCD pin connector for possiable damaged. Clean, re-solder or replace if necessary.
Now Check Continuity between Display connector to the resistor compounds. if any of then is track missing then make a jumper.
If the above procedures doesn’t fix the problem the possible faulty is the main engine IC. Try to re-heator rework it.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.