Security Camera System Review | Step by Step Installation | HIKVISION
Security Camera Installation and Review | Step-by-Step | HIKVISION
Camera link
https://app.hb.biz/nGuDbmuL81xb
NVR link
https://app.hb.biz/FW99BpF467UP
Gigabit PoE switch link
https://app.hb.biz/s3C8mgrQ9zxN
Standard PoE switch link
https://app.hb.biz/NYRbETf98seo
Hard disk link
https://app.hb.biz/ZNIRkJmzNOuz
Cat6 cable link
https://app.hb.biz/DKiJGqUKXriK
HDMI cable
https://app.hb.biz/o91mSQpgpuKq
Cable tester
https://app.hb.biz/DGANMjlhvTyN
Next Generation Network Pliers
https://app.hb.biz/LuiPWbylgveX
In this video, I explain step-by-step and through a real-world application how to install a security camera system in an area with approximately 100 meters between two different locations.
📌 This setup is designed as:
✔️ 2 different locations
✔️ 7 cameras
✔️ 16-channel NVR
✔️ PoE switches
✔️ PoE supported up to 300 meters
✔️ Closed system operating without internet connection
The video details:
🔹 Wired vs. wireless comparison
🔹 Why was a wired system preferred?
🔹 What is a PoE switch and how to choose one?
🔹 NVR connection logic
🔹 Camera IP setting
🔹 Long-range tests
🔹 Ethernet cable (RJ45) crimping
🔹 Recording time calculation
🔹 Night vision, IR, and image settings
🔹 Motion detection and recording types
Explained with real-life experience.
⚠️ This video is for educational purposes only.
Those without knowledge of electricity and infrastructure should exercise caution when performing this installation.
Product links can be found in the description.
You can write your questions in the comments below 👇
⚠️ IMPORTANT INFORMATION ⚠️
80% of the problems encountered in long-distance camera installations are:
👉 Wrong cable
👉 Low-quality switch
👉 Incorrect PoE capacity
👉 Incorrect RJ45 connector
If the camera is not displaying an image from a distance:
• First, test at a short distance
• Get the image directly from the switch
• Determine if the problem is the cable or the distance
This method will save you hours of troubleshooting.
#securitycamera
#camerainstallation
#poecamera
#nvrsystem
#ipcamera
#cctv
#poeswitch
#ethernetcable
#rj45
#cat6
#securitysystem
#technicalexplanation
#security #camera #system #installation #how #to #do #sweat #step #everything
#hikvision #4mp #nvr #camera #ip #harddisk #cat6 #test #4monthtest #4 #months #usage
00:00 Introduction – How to install a security camera?
00:06 System scenario: 2 zones – 100 meter distance
00:25 Wired or wireless? Why wired?
01:02 General overview of the system architecture
01:30 Critical points to consider during installation
01:43 List of products used
02:30 Camera technical specifications (4MP, microphone)
02:57 Why is bit rate and switch selection important?
03:08 Types of PoE switches and their purpose
03:50 Switch – NVR connection logic
04:03 Explanation of long-range PoE (300 meters)
04:17 Features of a 16-channel NVR
04:55 Why was CAT6 cable preferred? 05:23 NVR Box Contents
05:45 Hard Disk Installation (4 TB Security Disk)
06:54 NVR Ready for Installation
07:09 NVR Port Options and Cost Advantages
07:31 NVR Connections (Mouse, Ethernet, HDMI)
08:02 System Startup
08:14 General Connection Diagram Repeated
09:13 Switch Connection Layout
09:21 Introduction to Unmanaged Gigabit Switches
09:56 Connection Between Switches
10:15 300 Meters PoE Data + Power Transmission
10:47 General Features of Cameras
11:05 Camera Box Contents
11:16 Camera Connections and Microphone
11:45 Introducing Cameras to the System
12:04 Initial Setup and IP Setting
12:29 IP Address Logic
12:49 Adding Cameras
13:25 Camera Adding Errors and Solutions
13:52 Password Logic in PoE Systems
14:08 Using the Same Brand Products Advantage
14:23 Adding a camera later
15:04 Long-distance testing logic
15:34 Understanding distance and cable problems
16:13 Camera management from the main screen
16:24 Crimping the Ethernet cable (RJ45)
16:45 T568B color sequencing
17:53 RJ45 crimping process
18:57 Checking with a cable tester
19:24 Getting the system up and running
19:34 Camera image quality test
19:51 Camera settings (video + audio)
20:37 Recording settings
21:04 Disk formatting
21:17 Calculating recording time
21:50 Difference between continuous recording and event recording
22:12 Motion detection settings
22:36 Importance of camera-NVR compatibility
22:56 Night vision settings
23:23 Masking and light settings
23:44 Infrared and night mode problems
24:46 Problems experienced in automatic night mode
25:16 Night-day Balance settings
25:35 Recording playback and streaming settings
26:05 Interface and ease of use
26:32 General evaluation
26:45 Closed system setup
26:55 Connecting to the internet later
27:01 Closing and call