AUTOCAD MECHANICAL MODELING PART 2 - MAKING A 3D MODEL
Mechnical 3d drawing 2 - revolve command
Mechnical 3d drawing 2 - revolve command easy explained in malayalam
Mechnical 3d drawing 2 - revolve command
Steps to draw
Step 1.
Draw a straight Line for "180" units
Step 2.
Draw a line from the bottom end for"2.5" units { 5/2 = 2.5}
Draw a line upwards for "20" units (Height 20)
Step 3.
Draw a line from the ending pt towards outside(outward direction from center line) for"2.5" units {10-5 =5, 5/2 = 2.5}
Draw a line upwards for "20" units (Height 20)
Step 4.
Draw a line from the ending pt towards outside(outward direction from center line) for"5" units {20-10 =10, 10/2 = 5}
Draw a line upwards for "20" units (Height 20)
Step 5.
Draw a line from the ending pt towards outside(outward direction from center line) for"5" units {30-20 =10, 10/2 = 5}
Draw a line upwards for "20" units (Height 20)
Step 6.
Draw a line from the ending pt towards outside(outward direction from center line) for"5" units {40-30 =10, 10/2 = 5}
Draw a line upwards for "20" units (Height 20)
Step 7.
Draw a line from the ending pt towards outside(outward direction from center line) for"5" units {50-40 =10, 10/2 = 5}
Draw a line upwards for "20" units (Height 20)
Step 8.
Draw a line from the ending pt towards outside(outward direction from center line) for"15" units {80-50 =30, 30/2 =15}
Draw a line upwards for "20" units (Height 20)
Step 9.
Draw a line from the ending pt towards inside(inward direction to center line) for"15" units {50-80 =-30,-30/2 =-15 "-" means opp drctn }
Draw a line upwards for "40" units (Height 40)
Step 10.
Draw a line from the ending pt towards inside(inward direction to center line) for"5" units {40-50 =-10,-10/2 =-5 -" means opp drctn }
Draw a line downwards for "40" units (Height 40 for hole)
Cmmnd "rev " select axis of 180 line . enter angle 360.
" " GOT IT " "
#AutoCAD
#MechanicalModelling
#MechCAD